Cisco Catalyst 2960 Command Reference Manual page 623

Appendix B Catalyst 2960 Switch Debug Commands
Though visible in the command-line help strings, the rpc l3mm keyword is not supported.
Note
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines The undebug platform ip igmp snooping command is the same as the no debug platform ip igmp
snooping command.
Related Commands Command
debug ip igmp
snooping
show debugging
78-16882-01
Modification
This command was introduced.
Description
Displays information about platform-independent IGMP snooping activity.
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
debug platform ip igmp snooping
Catalyst 2960 Switch Command Reference
B-31