Cisco Catalyst 2960 Command Reference Manual page 251

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
This example shows how to delete policymap2:
Switch(config)# no policy-map policymap2
You can verify your settings by entering the show policy-map privileged EXEC command.
Related Commands Command
class
class-map
service-policy
show mls qos vlan
show policy-map
78-16882-01
Description
Defines a traffic classification match criteria (through the police, set, and
trust policy-map class configuration command) for the specified class-map
name.
Creates a class map to be used for matching packets to the class whose name
you specify.
Applies a policy map to a port.
Displays the quality of service (QoS) policy maps attached to an SVI.
Displays QoS policy maps.
Catalyst 2960 Switch Command Reference
policy-map
2-223