Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
Assigning a Backup TFTP Server
Using the Phone's Network Configuration Screen (Cisco Unified IP Phone 7905G and 7912G)
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
TFTP Server 2 displays the IP address of the backup TFTP server. This server is
used to obtain configuration files and software upgrades if the primary TFTP
server is unavailable.
Before you can assign a backup TFTP server, the Alternate TFTP setting must
be set to Yes.
This procedure does not apply to the Cisco Unified IP Phone 7902G.
Procedure
Display the Network Configuration menu.
For instructions, see the
on page
4-5.
Unlock Network Configuration menu options.
For instructions, see the
Configuration Menu" section on page
Scroll to TFTP Server 2.
Press the Edit softkey.
Enter the new Alternative TFTP Server address.
For information about entering values, see the
the Network Configuration Menu" section on page
Press the Validat softkey.
Press Save.
"Displaying the Network Configuration Menu" section
"Unlocking and Locking Options on the Network
4-6.
"Guidelines for Editing Settings in
Configuring TFTP Options
4-7.
4-35