Configuring Telephony Features Using Cisco Unified CallManager Administration
Configuring Telephony Features Using
Cisco Unified CallManager Administration
Table 5-1
Configuring Telephony Features Using Cisco Unified CallManager
Administration
Cisco Unified
IP Phone
Feature
Models
Abbreviated
7905G
•
dialing
•
7912G
Auto answer
7902G
•
7905G
•
7912G
•
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
5-2
After you add Cisco Unified IP Phones to Cisco Unified CallManager, you can
add functionality to the phones.
features, many of which you can configure using Cisco Unified CallManager
Administration. The Cisco Unified IP Phone Models column lists the phones that
support each feature. The Reference column lists Cisco Unified CallManager
documentation that contains configuration procedures and related information.
For information about using most of the features on a phone, refer to
Cisco Unified IP Phone 7902G Phone Guide or to Cisco Unified IP Phone
7905G/7912G Phone Guide.
Description
A user can configure up to 99
speed-dial entries on a phone.
Speed-dial entries that are not
assigned to the speed-dial buttons
on the phone are used for
abbreviated dialing. When a user
starts dialing digits, the AbbrDial
softkey appears, and the user can
access any speed-dial entry by
entering the appropriate index.
Forces the speakerphone to go off
hook automatically when an
incoming call is received.
Chapter 5
Configuring Features, Services, and Users
Table 5-1
includes a list of supported telephony
Reference
Refer to
Cisco Unified CallManager
Administration Guide for
information about abbreviated
dialing and speed dialing.
Refer to
•
Cisco Unified CallManager
Administration Guide.
Refer to
•
Cisco Unified CallManager
Features and Services Guide.
OL-8151-01