Viewing Model Information And Serial Number; Viewing Status Messages - Cisco 7902G Administration Manual

Chapter 6

Viewing Model Information and Serial Number

Viewing Model Information and Serial Number
Step 1
Step 2
Step 3

Viewing Status Messages

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
6-2
Viewing Status, Statistics, Model and Firmware Information on the Cisco Unified IP Phone
You can verify the model and serial number of Cisco Unified IP Phones 7905G
and 7912G by viewing the Model Information screen.
Procedure
Press the Menu button.
Choose Settings > Model Information.
Use the Navigation button to display the information in the Model Information
screen.
Table 6-1 describes the information that appears in this screen.
To exit the Model Information screen, press the Exit softkey.
Table 6-1 Model Information Screen Items
Item
Model Number
MAC Address
AppLoadID
BootLoadID
Serial Number
Use status messages on the Cisco Unified IP Phone 7905G and 7912G to
diagnose network configuration problems. You can access these messages at any
point, even if the phone has not finished starting up.
Description
Model number of the phone
MAC address of the phone
Identifier of the firmware running on the phone
Identifier of the factory-installed load running on the
phone
Serial number of the phone
OL-8151-01