Configuring Startup Network Settings - Cisco 7902G Administration Manual

Chapter 3 Setting Up the Cisco Unified IP Phone

Configuring Startup Network Settings

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
The main LCD screen displays:
4.
Current date and time
•
Primary directory number
•
Softkeys
•
If the phone successfully passes through these stages, it has started up properly.
Otherwise, see to the "Resolving Startup Problems" section on page
If you are not using DHCP in your network, you must configure these network
settings on the Cisco Unified IP Phone after installing the phone on the network:
IP address
•
IP subnet mask
•
Default gateway IP address
•
Domain name
•
DNS server IP address
•
TFTP server IP address
•
Collect this information and follow the procedures defined in
"Configuring Network Settings on the Cisco Unified IP Phone."
Configuring Startup Network Settings
7-2.
Chapter 4,
3-11