Cisco 7902G Administration Manual page 36

Understanding the Cisco Unified IP Phone 7902G
4
5
6
7
8
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
1-4
Conference Sets up a single call for 3 to 16 participants.
Messages Accesses voice messages left by callers.
Volume button Increases or decreases volume for the handset. Also
controls the ring volume (if on-hook).
Hold button Places an active call on hold, resumes a held call, or
switches between an active call and a held
call—depending on the line state.
Menu button Accesses the Interactive Voice Response (IVR) system
for phone configuration. You should only use this button
as directed by your system administrator.
Note
Keypad Works exactly like the keypad on a traditional telephone.
Handset with Functions like a traditional handset. The light strip at the
indicator light top of the handset blinks when the phone rings and
remains lit to indicate a new voice message (depending
on your voice messaging system).
Chapter 1 An Overview of the Cisco Unified IP Phone
If you accidentally press this button and enter the
IVR, hang up the phone to exit.
OL-8151-01