Objectives; Organization - Cisco 7902G Administration Manual

Objectives

Objectives

Organization

Chapter
Chapter 1, "An Overview of the
Cisco Unified IP Phone"
Chapter 2, "Preparing to Install the
Cisco Unified IP Phone on Your Network"
Chapter 3, "Setting Up the
Cisco Unified IP Phone"
Chapter 4, "Configuring Network Settings on the
Cisco Unified IP Phone"
Chapter 5, "Configuring Features, Services, and
Users"
Chapter 6, "Viewing Status, Statistics, Model and
Firmware Information on the
Cisco Unified IP Phone"
Chapter 7, "Troubleshooting the
Cisco Unified IP Phone"
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
xiv
This guide provides the required steps to get the Cisco Unified IP Phone up and
running on a Voice-over-IP (VoIP) network. Because of the complexity of an IP
telephony network, this guide does not provide complete and detailed information
for procedures that you need to perform on the Cisco Unified CallManager
application or other network devices.
This guide is organized as follows:
Description
Provides a conceptual overview and description of
the Cisco Unified IP Phone
Describes how the Cisco Unified IP Phone
interacts with other key IP telephony components,
and provides an overview of the tasks required
prior to installation
Describes how to properly and safely install and
configure the Cisco Unified IP Phone on your
network
Describes how to configure network settings,
verify status, and make global changes to the
Cisco Unified IP Phone
Provides an overview of procedures for
configuring telephony features, setting up phone
services, and adding users to
Cisco Unified CallManager
Explains how to view model information, status
messages, network statistics, and firmware
information from the Cisco Unified IP Phone
Provides tips for troubleshooting the
Cisco Unified IP Phone
Preface
OL-8151-01