Appendix; Changing The Graphic On The Cisco Unified Ip Phone Lcd Screen - Cisco 7902G Administration Manual

Changing the Graphic on the
Cisco Unified IP Phone LCD Screen
When the Cisco Unified IP Phone 7905G and 7912G are not in use for a call, a
graphic appears on the LCD screen. Using TFTP configuring, you can change this
graphic to one that you provide. For example, you might change the graphic to
your company logo.
This section does not apply to the Cisco Unified IP Phone 7902G.
Note
Before you can change the graphic on the phone, you must use a graphics program
to create an image with the following attributes:
•
•
•
•
In addition, you will need the bmp2logo.exe tool, which converts your bitmap
image file to a .logo file that can be downloaded to the phone. This tool is bundled
with the Cisco Unified IP Phone software. You can also obtain it from the CCO
website at the following URL. It is included with the SCCP Software Package Zip
file.
http://www.cisco.com/cgi-bin/tablebuild.pl/ip_phone_client
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Width of 88 pixels.
Height of 27 pixels.
Monochrome (black-and-white).
Saved as bitmap file with the extension .bmp. For example, mylogo.bmp.
A P P E N D I X
F
F-1