• Basic Information—Enables you to configure basic aspects of a port, such as the ports name,
the blocked status, the Fabric Address Notification (FAN) status, the port type, and the port
speed.
• Rx BB Credit—Enables you to configure receive BB_Credits for a port.
• NPIV—Enables you to configure and enable N_Port ID Virtualization (NPIV) functionality for
a port. Perform the procedure in this section to configure names and operating characteristics
for the Edge Switch ports.
To configure the basic port information:
1.
Select Configure > Ports > Basic Information.
The Port Basic Information dialog box is displayed
Figure 45
Basic Information Dialog box
a. For each port to be configured, enter a port name of 24 or fewer alphanumeric characters in
the associated Name box.
The port name should identify the device to which the port is attached.
NOTE:
then click go.
b. Select or clear the check box in the Blocked column to block or unblock a port (default is
unblocked).
78
Using the HAFM Basic interface
If you want to select another port, enter the port number in the Jump to Port box and
(Figure
45).