Delete Alerts; Test Remote Notification; Test Remote Notification Dialog Box; Information Dialog Box - HP storageworks 2/32 Installation Manual

Delete Alerts

Use the following steps to delete existing threshold alerts:
1. At the Hardware View page, choose Configure > Threshold Alerts. The
2. Select the alert that you want to delete by selecting the alert information in the
3. Click Yes. The alert is removed from the dialog box.

Test Remote Notification

If the call-home and e-mail notification features are enabled, set up the HAFM
application to test these remote notification features. Because the features are
configured at the HAFM application, call-home and e-mail notification are
enabled for multiple switches or HP managed products. To test remote
notification:
1. Close the Hardware View page for the switch and return to the Product
2. At the Product View page, choose Maintenance > Test Remote
Figure 30: Test Remote Notification dialog box
3. Choose Call Home and E-Mail to perform applicable tests.
4. Click Send Test. Call-home and e-mail test messages are transmitted and an
Edge Switch 2/32 Installation Guide
Configure Threshold Alerts dialog box displays.
table and click Delete. A message displays asking you to confirm the deletion.
View page by closing the window.
Notification. The Test Remote Notification dialog box displays
The call home test provides a test notification message to a remote support
center. Depending on the option chosen during HAFM installation, the test
notification message is transmitted over telephone lines or LAN.
Information dialog box displays
box.
Installing and Configuring the Edge Switch 2/32
(Figure 31). Click OK to close the dialog
(Figure 30).
77