Modifying Alerts - HP 316095-B21 Installation Manual

A final screen is displayed to provide a summary of your alert configuration
Figure 36 New Threshold Alerts dialog box
12.Click Finish.
The Configure Threshold Alerts dialog box is displayed with a list of the name, type, and state of
the alert that you just configured. At this point, the alert is not active.
13.To activate the alert, select the alert information that is displayed in the Configure Threshold
Alerts table and click Activate
The alert is activated.
Figure 37 Configure Threshold Alerts dialog box

Modifying alerts

Use the following steps to modify an existing threshold alert configuration:
1. At the Hardware view, select Configure > Threshold Alerts.
The Configure Threshold Alerts dialog box is displayed.
2. Select the alert that you want to modify by clicking the alert information in the table.
summary screen
—
(Figure 37).
alert activated
—
(Figure
Edge Switch 2/32 installation guide
36).
67