Adding an IP Address
You can add IP addresses and subnets through which the SAN can be discovered.
Perform the following to add an IP address:
1. Choose Discover > Setup. The Discover Setup dialog box displays, as shown
2. Click Add. The Domain Information dialog box displays, as shown in
Figure 26: Domain Information dialog box (IP Address tab)
3. Enter a description for the product in Description field.
4. Enter the IP address in the IP Address field.
5. Enter the subnet mask associated with the IP address in the Subnet Mask
6. If you want to generate a sequence of IP addresses, perform the following:
Note:
first three octets.
7. Click OK.
HA-Fabric Manager User Guide
in
Figure 25
on page 70.
Figure
26.
field.
Choose the Generate a sequence of IP addresses check box.
Enter the last IP address in the Last IP field.
All IP addresses in a sequence must be on the same subnet and have the same
Setting Up the Application
71