Modifying A Firmware Version Description; Modify Firmware Description Dialog Box - HP 316095-B21 Installation Manual

6. Enter a description (up to 24 characters in length) for the new firmware version and click OK.
HP recommends the description include the installation date and text that uniquely identifies the
firmware version.
Click OK.
7.
The File Transfer message box is displayed. As the transfer progresses, a progress bar travels
across the message box to show percent completion.
When the transfer completes, a Transfer Complete message box is displayed indicating the new
firmware version is stored on the HAFM appliance hard drive.
8. Click Close to close the message box.
9. The new firmware version and associated description are displayed in the Switch Firmware
Library dialog box.
10.Click Close.
11.To send the firmware version to an Edge Switch, see
Edge Switch" on page 103.

Modifying a firmware version description

Use these steps to modify the description of an Edge Switch firmware version in the library stored on
the HAFM appliance hard drive:
1. At the management appliance, open the HAFM application.
2. At the HAFM application's physical map, right-click the icon representing the Edge Switch for
which the firmware description will be changed, and then select Element Manager from the
pop-up menu.
The application opens.
3. Select Maintenance > Firmware Library.
The Firmware Library dialog box is displayed
4. Select the firmware version to be modified and click Modify.
The Modify Firmware Description dialog box is displayed
Figure 62

Modify Firmware Description dialog box

5. Enter a modified description (up to 24 characters in length) for the firmware version and click
OK.
HP recommends the description include the installation date and text that uniquely identifies the
firmware version.
The new description for the firmware version is displayed in the Switch Firmware Library dialog
box.
6. Click Close.
102 Managing firmware versions
"Downloading a firmware version to an
(Figure 58).
(Figure 62).