Configuring Edge Switch Parameters; Date Time View - HP 316095-B21 Installation Manual

The Date Time view is displayed
Figure 48

Date Time view

a. Click the Date boxes that require change, and enter numbers in the following ranges:
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YYYY): greater than 1980
b. Click the Time boxes that require change, and enter numbers in the following ranges:
Hour (HH): 0 through 23
Minute (MM): 0 through 59
Second (SS): 0 through 59
2. Click OK to save the information.
The following message is displayed.
Your changes have been successfully activated

Configuring Edge Switch parameters

Perform this procedure to configure the following Edge Switch and fabric operating parameters:
Buffer-to-Buffer Credit (BB_Credit), Error Detect Time Out Value (E_D_TOV), Resource Allocation
Time Out Value (R_A_TOV), preferred domain ID and switch priority.
To configure Edge Switch parameters:
1. Set the Edge Switch offline (see
2. Select Configure > Switch > Parameters.
82 Using the HAFM Basic interface
(Figure 48).
"Setting the Edge Switch offline and online" on page 77).