Removing The Headlight Mask With The Headlight - Husqvarna FE 450 Owner's Manual

15 ELECTRICAL SYSTEM
15.6

Removing the headlight mask with the headlight

Warning
Fire hazard Incorrect fuses overload the electrical system.
–
–
–
Use spare fuses with the correct rating only.
Fuse (75011088010) (
Tip
Replace the spare fuse in the fuse box so that it is available if needed.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover.
–
Mount EFI control unit
F00359-10
Finishing work
–
Mount the seat. (
–
Install the air filter box cover. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
Main work
–
Detach brake line
–
Release rubber straps
F00339-10
–
Detach plug-in connectors
F00340-10
Only use fuses with the required ampere value.
Do not bypass or repair fuses.
p. 114)

on the holder.
p. 55)
p. 56)

and wiring harness

. Slide the headlight mask up and swing it forward.

and take off the headlight mask with the headlight.

.
89