Removing The Headlight Mask With The Headlight - Husqvarna FE 350 2023 Owner's Manual

Table of Contents

Advertisement

15 ELECTRICAL SYSTEM
15.6
108

Removing the headlight mask with the headlight

H03749-10
Guideline
(FE 350 EU)
Fuse 1 – 10 A – EFI control unit, lambda sensor, combi-
nation instrument, combination switch (optional), elec-
tronic fuel injection, diagnostics connector, fuel vapor
retention system, fuse 4
Fuse 2 ‑ 10 A ‑ high beam, low beam, position light, tail
light, license plate lamp
Fuse 3 - 10 A - radiator fan, horn, brake light, turn sig-
nal
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
Info
A faulty fuse has a burned-out fuse wire
Warning
Fire hazard Incorrect fuses overload the electrical
system.
Only use fuses with the required ampere value.
Do not bypass or repair fuses.
Insert the spare fuse with the correct rating.
Fuse (75011088010) (
Fuse (75011088005) (
Tip
Put a spare fuse in the fuse box so that it is available if
needed.
Check the function of the electrical power consumers.
Close the fuse box cover
Finishing work
Mount the seat. (
p. 65)
Install the air filter box cover. (
1
Loosen rubber straps
swing it forward.
A
.
p. 142)
p. 142)
1
.
p. 66)
. Slide the headlight mask up and

Advertisement

Table of Contents
loading

This manual is also suitable for:

3402637en

Table of Contents