Removing The Headlight Mask With The Headlight - Husqvarna FE 250 Owner's Manual

15 ELECTRICAL SYSTEM
15.6
110

Removing the headlight mask with the headlight

H03749-10
H03748-10
Warning
Fire hazard Incorrect fuses overload the electrical
system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert spare fuse with the correct rating.
Fuse (75011088010) (
Fuse (75011088005) (
Tip
Insert a spare fuse in the fuse box so that it is avail-
able if needed.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover
Finishing work
–
Mount the seat. ( p. 66)
–
Install the air filter box cover. (
–
Press and hold the switch-off button
idling until the engine stops.
–
1
Loosen rubber straps
swing it forward.
–
2
Remove screw .
–
Detach the brake line and wiring harness from the headlight
mask.
–
Pivot the headlight mask forwards and place it on the fender.
p. 141)
p. 141)
1
.
p. 67)
while the engine is
. Slide the headlight mask up and