Removing The Headlight Mask With The Headlight - Husqvarna FE 501s 2022 Owner's Manual

15.6

Removing the headlight mask with the headlight

Guideline
Fuse 1 – 10 A – EFI control unit, lambda sensor, combina-
tion instrument, electronic fuel injection, diagnostics con-
nector, fuel vapor retention system, fuse 4
Fuse 2 ‑ 10 A ‑ high beam, low beam, position light, tail
light, license plate lamp
Fuse 3 - 10 A - radiator fan, horn, brake light, turn signal
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
Info
A faulty fuse has a burned-out fuse wire
Warning
Fire hazard Incorrect fuses overload the electrical
system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert the spare fuse with the correct rating.
Fuse (75011088010) (
Fuse (75011088005) (
Tip
Put a spare fuse in the fuse box so that it is available if
needed.
–
Check the function of the electrical power consumers.
–
Close the fuse box cover
Finishing work
–
Mount the seat. (
–
Install the air filter box cover. (
–
Loosen rubber straps
swing it forward.
H03749-10
ELECTRICAL SYSTEM 15
A
p. 144)
p. 144)
1
.
p. 67)
p. 68)
1
. Slide the headlight mask up and
.
111