23
SUBSTANCES
Brake fluid DOT 4
Standard/classification
–
DOT
Guideline
–
Use only brake fluid that complies with the specified standard (see specifications on the container) and that possesses the cor-
responding properties.
Recommended supplier
®
Bel‑Ray
–
Super DOT 4 Brake Fluid
Coolant
Guideline
–
Only use high quality coolant with corrosion inhibitor for aluminum motors (even in countries with high temperatures). Using
inferior antifreeze can result in corrosion and foaming.
Mixture ratio
Antifreeze protection: −25... −45 °C (−13...
−49 °F)
Recommended supplier
®
Bel‑Ray
–
Moto Chill Racing Coolant
Engine oil (SAE 10W/50)
Standard/classification
–
JASO T903 MA (
p. 119)
–
SAE (
p. 119) (SAE 10W/50)
Guideline
–
Use only engine oils that comply with the specified standards (see specifications on the container) and that possess the corre-
sponding properties.
Synthetic engine oil
Recommended supplier
®
Bel‑Ray
–
Works Thumper Racing Synthetic Ester 4T
Fork oil (SAE 4) (48601166S1)
Standard/classification
–
SAE (
p. 119) (SAE 4)
Guideline
–
Use only oils that comply with the specified standards (see specifications on the container) and that exhibit the corresponding
properties.
Shock absorber fluid (SAE 2.5) (50180751S1)
Standard/classification
–
SAE (
p. 119) (SAE 2.5)
Guideline
–
Use only oils that comply with the specified standards (see specifications on the container) and that exhibit the corresponding
properties.
Super unleaded (ROZ 95/RON 95/PON 91)
Standard/classification
–
DIN EN 228 (ROZ 95/RON 95/PON 91)
Guideline
–
Only use unleaded super fuel that matches or is equivalent to the specified fuel grade.
–
Fuel with an ethanol content of up to 10 % (E10 fuel) is safe to use.
Info
Do not use fuel containing methanol (e. g. M15, M85, M100) or more than 10 % ethanol (e. g. E15, E25, E85, E100).
anti-corrosion/antifreeze
distilled water
117