Light Switch; Turn Signal Switch; Emergency Off Switch; Electric Starter Button - Husqvarna FE 450 Owner's Manual

6 CONTROLS
6.6

Light switch

6.7

Turn signal switch

6.8

Emergency OFF switch

6.9

Electric starter button


Light switch
Possible states
F00260-12
Turn signal switch
Possible states
F00261-10
The emergency OFF switch
Possible states
F00262-10
The electric starter button
Possible states
• Electric starter button
• Electric starter button
ated.
F00263-10
is fitted on the left side of the handlebar.
Low beam on – Light switch is in the central position. In this position,
the low beam and tail light are switched on.
High beam on – Light switch is turned to the left. In this position, the
high beam and the tail light are switched on.

is fitted on the left side of the handlebar.
Turn signal off – The turn signal switch is in the central position.
Left turn signal, on – The turn signal switch is turned to the left.
Right turn signal, on – The turn signal switch is turned to the right.

is fitted on the right side of the handlebar.
Ignition off – In this position, the ignition circuit is interrupted, a run-
ning engine stops, and a non-running engine will not start.
Ignition on – In this position, the ignition circuit is closed and the
engine can be started.

is fitted on the right side of the handlebar.
in basic position
is pressed – In this position, the electric starter is actu-
15