12
SERVICE WORK ON THE CHASSIS
12.15
Installing the front fender
12.16
Removing the shock absorber
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Mount and tighten screws
Guideline
Remaining screws, chassis
F00283-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove the cable ties.
–
Remove screws
–
Remove screws
–
Remove the frame protectors on the left and right.
K00589-10
–
Remove screw
–
Remove fitting
Info
Raise the wheel slightly to be able to remove the screws more easily.
F00284-10
–
Press angle lever
–
Press linkage lever
F00285-10
.
p. 91)
.
with the washers.
.
.
toward the rear.
downward.
.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 90)
p. 45)
52