M.2 Ssd Enablement Kit - HP ProLiant DL180 Gen9 Service Manual

Remove the cache module.
8.
To replace the component, reverse the removal procedure.

M.2 SSD enablement kit

For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
To remove the component:
Power down the server (on page 27).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 28).
o
Remove the server from the rack (on page 30).
o
Remove the access panel
4.
Disconnect the SATA cables from the system board.
5.
("Access panel" on page 37).
Removal and replacement procedures 46