Panasonic KX-NS1000 Pc Programming Manual page 66

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

3.1 Home Screen
If the PBX is operating as the Master Backup unit or is in Isolated mode, but the Master unit has been
restored to normal operation, you can right-click the PBX's icon and select Normal Mode to restore the
PBX to normal operation. (It will reconnect to the Master unit PBX as a Slave unit.)
Note
For the following items related to the Unified Messaging (UM) programming of a Slave unit, you
must select Direct Login to log in to the PBX that the UM Group in which programming will be
performed belongs to:
4.1.4 Status—Equipment Status—UM Port status
4.1.5 Status—Equipment Status—USB
5.3 System Control—FAX Card
6.1 Tool—System Data Backup to USB
6.9 Tool—UM Data Backup
6.10 Tool—UM Data Restore
6.11 Tool—UM Backup History
7.3.4 Utility—Log—UM System Log
7.4.7 Utility—Monitor/Trace—UM System Trace (Internal)
7.4.5 Utility—Monitor/Trace—Fax - Protocol Trace
7.4.6 Utility—Monitor/Trace—Fax - Task sequence Trace
7.5.3 Utility—Report—UM View Reports
7.8 Utility—Command
7.9 Utility—UM – System Prompts Customisation
UM Configuration settings
(For details for UM Configuration settings, see "Section 20 UM Configuration—[1] Mailbox
Settings" to "Section 26 UM Configuration—[7] System Security".)
PBX Status Icons
If the PBX is in service (INS) and operating normally, the unit will be displayed as shown above. Icons are
displayed on PBX units when they are not in service and operating normally. The following icons are displayed
on PBX units according to their status:
Icon
Connection Error (Status Unknown)
The site where you are logged in cannot communicate with the sites displaying
this icon and cannot determine their status.
Maintenance Mode
This PBX is installed but it is out of service (OUS) and maintenance is being
performed on it. PBXs with this icon are visible on the home screen, but they are
currently not connected to other PBXs in the One-look network.
Pre-install Mode
This PBX is installed but it is out of service (OUS) and has not yet been put in
service (INS). The free trial period for activation key trials has not yet begun.
Offline Master Unit
The Master unit is currently not connected to other PBXs in the One-look network
and is not operating as the Master unit.
66
PC Programming Manual
Description

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents