Panasonic KX-NS1000 Pc Programming Manual page 900

24.4 UM Configuration—[5-4] System Parameters—Parameters
Feature Guide References
3.2.1.24 Intercom Paging
Announcement Repeat Cycle (1-3 times)
Specifies the number of times the system announces the page.
Example:
"I have a call for (name)".
Value Range
1–3 times
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Feature Guide References
3.2.1.24 Intercom Paging
Intercom Paging Retry (1-10 times)
Specifies the number of times to retry paging when the called subscriber has set
for No Answer/
the subscriber is busy or if there is no answer.
Value Range
1–10 times
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
PC Programming Manual References
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—
Feature Guide References
3.2.1.24 Intercom Paging
Caller Recorded Name Announce Mode
Determines whether or not the system announces the caller's name during paging. (In order for the name to
be announced, it must be recorded beforehand.)
Value Range
Disable, Enable
900 PC Programming Manual
Incomplete Call Handling for Busy to "Page the mailbox owner by intercom paging" and
Incomplete Call Handling
Incomplete Call Handling for No Answer
Incomplete Call Handling for Busy