•
Transfer to Automated Attendant Service: Allows the caller to access Automated Attendant Service.
•
Transfer to specified Custom Service Menu: Transfers the caller to the Custom Service specified here.
•
Transfer to operator: Connects the caller to an operator.
•
Transfer to outside (specified number): Transfers the caller to a specified outside telephone number.
Enter the PBX trunk access number, such as 9.
•
Page the party: Pages the subscriber.
•
Repeat greeting: Repeats the greeting.
•
None: No operation assigned.
Value Range
•
Transfer to specified mailbox: 2–[the value set in
•
Transfer to specified extension: 2–8 digits
•
Transfer to specified Custom Service Menu: 1–200
•
Transfer to outside (specified number): Outside Number 1–4
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—External MSG Delivery/Auto FWD/Personal
Custom Serv
Feature Guide References
3.2.2.24 Personal Custom Service
Outside Numbers
Specifies the outside telephone numbers that can be used for the "Transfer to outside (specified number)"
operation in the Custom Service settings. Click OK when finished.
Value Range
Outside Number #1–#4: Max. 32 digits consisting of 0–9,
T: Dial Tone Detection
, : Dial Pause (default 1 s)
; : Dial Pause (default 3 s)
0–9,
, #: Dial Code
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—External MSG Delivery/Auto FWD/Personal
Custom Serv
Feature Guide References
3.2.2.24 Personal Custom Service
No DTMF Input Operation
Specifies the operation taken when no DTMF input (a caller does not dial anything) is received after the
Personal Greeting.
Value Range
Recording: The caller will be guided to leave a message.
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
Mailbox No. Max. Length (3-8)] digits
, #, and special codes
PC Programming Manual
809