Panasonic KX-NS1000 Pc Programming Manual page 59

A •
The following setting data is not saved to the Storage Memory Card, so will be deleted
when the PBX is initialised. This data is stored in the PBX's battery backup memory.
•
Advice of Charge (AOC)
•
Hospitality guest billing data
•
Timed Reminder
•
ICD Group login status
(All extensions are set to Login by default.)
•
Remote Extension Dial Lock
Setting Features
Q How do I change the dialling mode of an analogue trunk?
A •
From the 9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property -
LCO Port screen, change the
or "Pulse", as required.
Q How do I set disconnect detection (CPC Detection) for an analogue trunk?
A •
From the 9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property -
LCO Port screen, modify the
Incoming setting of the target port.
The required value varies by carrier. Transmission and reception can be set
separately.
Q What settings do I change to enable use of an extension ISDN telephone?
A •
From the 9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property -
BRI Port screen, set the
Q How do I connect to another PBX using QSIG?
A •
From the 9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property -
BRI Port or 9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property
- PRI Port screen, set the
"QSIG-Slave" or "QSIG-Master".
Q How do I edit a Class of Service, or create a new Class of Service?
•
A
Class of Service feature restrictions can be set from the 10.7.1 PBX
Configuration—[2-7-1] System—Class of Service—COS Settings screen.
Q How do I restrict calls between 2 extensions?
A •
Calls between extensions can be restricted from the 10.7.3 PBX
Configuration—[2-7-3] System—Class of Service—Internal Call Block screen.
Click in the relevant cells to select the COS levels whose extensions are blocked from
calling each other.
Q How do I restrict trunk calls made by extensions?
Dialling Mode setting of the target port to "DTMF"
CPC Signal Detection Time—Outgoing,
Port Type of the port you want to use to "EXT".
Port Type of the port you want to use to either
2.3 Frequently Asked Questions (FAQ)
PC Programming Manual 59