Panasonic KX-NS1000 Pc Programming Manual page 346

9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Caller ID—Caller ID (DTMF) Start Code 1 and Start Code 2
Selects the DTMF code used to detect the beginning of a Caller ID series. Start Code 1 is prior to Start Code
2.
Value Range
None, *, #, A, B, C, D
Maintenance Console Location
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
Caller ID—Caller ID (DTMF) Information Start Code
Selects the DTMF code used to detect the beginning of the information segment of a Caller ID series.
Value Range
None, *, #, A, B, C, D
Maintenance Console Location
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
Caller ID—Caller ID (DTMF) End Code
Selects the DTMF code used to detect the end of a Caller ID series.
Value Range
None, *, #, A, B, C, D
Maintenance Console Location
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
Caller ID—Caller ID (DTMF) Information Code-PRIVATE, OUT OF AREA,
TECHNICAL REASON, UNKNOWN NUMBER, RESTRICTED NUMBER
Specifies the number used to identify each type of information code.
346 PC Programming Manual