Panasonic KX-NS1000 Pc Programming Manual page 267

CLIR
Specifies whether to allow restriction of the display of the CLIP number on the called party's telephone when
making a SIP trunk call.
Value Range
Yes, No
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
CNIP (Send)
Specifies whether to send the caller's name to be displayed on the called party's telephone when making a
SIP trunk call.
Value Range
Yes, No
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
CNIP (Receive)
Specifies whether to receive the caller's name to be displayed on the called party's telephone when receiving
a SIP trunk call.
Value Range
Yes, No
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Advanced
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
PC Programming Manual 267