Utility-Monitor/Trace; Utility-Monitor/Trace-Isdn/Qsig Protocol Trace - Panasonic KX-NS1000 Pc Programming Manual

7.4 Utility—Monitor/Trace
7.4.1 Utility—Monitor/Trace—ISDN/QSIG Protocol Trace
This utility collects protocol trace data from BRI or PRI cards, and displays it on the PC.
This option is only available at Installer level in On-line mode, and requires that the target BRI or PRI card be
set to INS status.
Protocol trace data is continually accumulated on ISDN cards, and 3 types of data can be downloaded:
•
Real Time Trace: Pseudo-real-time data is collected through data polling at one-second intervals. The
displayed information is updated beginning when the Start button is clicked.
•
Accumulation Trace: Previously accumulated data is retrieved and displayed.
•
Error Accumulation Trace: Previously accumulated error data is retrieved and displayed. This trace
shows the data snapshot that is taken just before a card resets.
To view trace data
1.
From the Site-Shelf-Slot No. drop-down list, select the target slot. Each card will be preceded by a 3-digit
number, following the pattern "XYZ":
•
X: Site number (1–16)
•
Y: Shelf number (1–3)
–
1: KX-NS1000 physical shelf
–
2: Legacy Gateway 1
–
3: Legacy Gateway 2
•
Z: Slot number (1–11)
2.
From the Trace Data Type drop-down list, select the type of data to view.
3.
Click Start.
Trace information will be displayed.
4.
Select an option:
•
Click Capture to save the displayed trace information.
•
Click Clear to clear the screen display.
5.
Click Cancel to return to the main screen.
7.4.1 Utility—Monitor/Trace—ISDN/QSIG Protocol Trace
PC Programming Manual 129