Panasonic KX-NS1000 Pc Programming Manual page 243

Value Range
SIP Provider, Trunk Adaptor
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Feature Guide References
5.3.2 Trunk Adaptor Connection
Trunk Property
Specifies the networking type of each SIP trunk.
Note
If Connection Attribute is set to "Trunk Adaptor" for the port, only "Public" will be available for this setting.
Value Range
Public, VPN
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Channel Attribute
Specifies the channel property of each port to enable several sessions to be performed for one subscription
with the SIP provider.
Value Range
Basic channel: The subscriber channel that is assigned the SIP registration information.
Additional channel for SlotN (N=1–4) ChN (N=1–16): The subordinate channel that uses the same registration
information as a Basic channel for SIP sessions. Select the Slot number and the Basic channel number to
which the Additional channel belongs.
Not Used: The channel is not in use.
Note
•
The Basic channel and Additional channel can belong to different V-SIPGW16 cards.
•
When you save the data on the Main screen, for each virtual SIP gateway port that has Channel
Attribute set to Basic channel, the following items are checked for duplication: SIP Server Name,
SIP Server IP Address, and SIP Service Domain.
A maximum of 32 different SIP providers can be programmed.
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Provider Name
Specifies the name of the SIP provider.
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
PC Programming Manual 243