9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Jitter Buffer Delay Init. for Voice
Specifies the initial size of the jitter buffer for voice communications.
Value Range
0–200 ms
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Jitter Buffer Adaptation Period for Voice
Specifies the length of time that the jitter buffer is applied for voice communications.
Value Range
1000–65530 ms
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Packet Sampling Time (G.711A)
Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Value Range
20 ms, 30 ms, 40 ms, 50 ms, 60 ms
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Packet Sampling Time (G.711Mu)
Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Value Range
20 ms, 30 ms, 40 ms, 50 ms, 60 ms
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
210
PC Programming Manual