Pbx Configuration-[4-1-4] Extension-Wired Extension-Flexible Button - Panasonic KX-NS1000 Pc Programming Manual

12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
12.1.4 PBX Configuration—[4-1-4] Extension—Wired
Extension—Flexible Button
Each flexible button can be customised to allow one-touch access to a certain feature. A maximum of 84 flexible
buttons can be customised for each extension. Select the desired extension from the Extension Number /
Name list.
To copy the flexible button settings of an extension to another extension, click Copy to. This operation (Copy
to) is available at the User (Administrator) level.
For more information on flexible buttons, see "2.21.2 Flexible Buttons" in the Feature Guide.
Once flexible buttons have been programmed, the Terminal Label Print utility can be used to print label sheets,
which can be attached to extension telephones for quick reference. For details, see 1.2.2.1 Editing and
Printing Terminal Labels in Off-line Mode.
To access the Super Master CS for related programming, click SIP-CS Web. The CS Web login screen will
open in your web browser.
Note
For this button to be enabled, you must specify the URL of the Super Master CS in the Utility—CS-Web
Connection screen. See 7.12 Utility—CS-Web Connection.
Type
Specifies the feature to be assigned to the flexible button.
Value Range
Not Stored, Loop CO, Single CO, Group CO, DSS, One-touch, ICD Group, Message Waiting, FWD/DND
(Both), FWD/DND (External), FWD/DND (Internal), Group Fwd (Both), Group Fwd (External), Group Fwd
(Internal), Account, Conference, Terminate, EFA, Charge, Call Park, Call Log, Log-in/Log-out, Hurry-up,
Wrap-up, System Alarm, Time Service, Answer, Release, TRS Level Change, ISDN Service, CLIR, COLR,
ISDN Hold, Headset, Time Service - Automatic/Manual, Check In, Check Out, Cleaned Up, Two-way
Record, Two-way Transfer, LCS, Voice Mail Transfer, NDSS, CTI, PDN, SDN, DN
Notice
For each KX-UT series SIP phone that is connected to the PBX, at least one DN button must be assigned
to the extension. Without a DN button assigned, the extension will not be able to make or receive calls.
Maintenance Console Location
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
PC Programming Manual References
12.1.4.1 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button—Flexible button data copy
Parameter Selection (for Single CO)
Specifies the trunk to be accessed.
Value Range
1–600
622 PC Programming Manual