Pbx Configuration-[1-1] Configuration-Slot-Site Property; Pbx Configuration-[1-1] Configuration-Slot-Site Property-Main - Panasonic KX-NS1000 Pc Programming Manual

9.5 PBX Configuration—[1-1]
Configuration—Slot—Site Property
The properties of the PBX site can be specified. When you place the mouse cursor over the Site Property
button, Main, FAX Card, and NSVM buttons are displayed. Click a button to open that site property screen.
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site
Property—Main
Overall settings for the PBX site can be specified.
Main
Storage Memory Size
Indicates the size of the installed storage memory card (reference only).
Value Range
Card Size
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Multisite Connection Ability
Specifies whether the PBX may connect to other PBX sites as part of a One-look network.
Value Range
Enable, Disable
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Isolated Mode
Specifies whether the PBX will continue to operate in Isolated mode if the PBX cannot connect to the Master
unit or the Backup Master unit (if set).
Note
•
This setting is available for Slave unit PBXs in a One-look network that are not designated as the
Backup Master unit.
•
When this item is set to "Disable", system functions for the site will become unavailable if the Master
unit and/or Backup Master unit fails.
Value Range
Enable, Disable
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main
PC Programming Manual 201