Exc-F Six Days - KTM 250 EXC-F 2014 Setup Instructions

3 WORK
3.18

EXC-F SIX DAYS

3.18.1 Setting kilometers or miles
Info
If you change the unit, the value ODO is retained and converted accordingly.
The values TR1, TR2, A1, A2 and S1 are cleared when the unit of measure is changed.
3.18.2 Setting the speedometer functions
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes are activated.
–
Press the button
the display.
–
Press the button
The hour display flashes.
–
Set the hour display with the button
–
Press the button
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing
the button
400330-01
Info
The seconds can only be set to zero.
–
Press the button
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
display.
–
Press the button
The Setup menu is displayed and the active functions are shown.
–
Repeatedly press the button
Setting the Km/h
–
Press the button
Setting the Mph
–
Press the button
400329-01
–
Wait 3–5 seconds
The settings are stored.
Info
If no button is actuated for 10–12 seconds or there is no signal from the
wheel speed sensor, then the settings are automatically stored and the
Setup menu is closed.
Condition
The motorcycle is stationary.
briefly and repeatedly until CLK appears at the bottom right of
for 3 - 5 seconds.
and/or button
briefly.
and the button .
for 3 - 5 seconds.
briefly until H appears at the bottom right of the
for 2–3 seconds.
briefly until Km/h/Mph flashes.
.
.
16
.