Dell S6000 Reference Manual page 563

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

Version 9.3.0.0

To enable routing of RRoCE packets, the VLAN ID is mapped to the default VLAN ID

of 4095 and this mapping is performed using VLAN translation. After VLAN

translation, the RRoCE packets are considered in the same manner as normal IP

packets that received on L3 interface and routed in the egress direction. At the

egress interface, the VLAN ID is appended to the packet and transmitted out of the

interface as a tagged packet with the dot1Q value preserved. The dot1Q value is

preserved only for egress interfaces that are associated with a VLAN or a lite-

subinterface . If a Layer 3 interface is configured without the encapsulation 802.1Q

VLAN ID or is an untagged interface in a VLAN , the dot1Q value is not preserved .

Flex Hash and Optimized Boot-Up

Introduced on the S6000 platform.