Dell S6000 Reference Manual page 347

<1-429496729
5>
<0.1-65535.65
535>
A.B.C.D
X:X:X:X::X
dampening
flap-statistics
ipv4
ipv6
peer-group
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Version 6.5.1.0
Border Gateway Protocol
NOTE: You must execute the clear ip bgp soft
out command when ever there is a change in the local
policy. If you do not run this command after a local
policy change, then these policy changes are not
reflected in the responses to the peer's route refresh
messages.
Enter <1-4294967295> to clear peers with the AS number.
Enter <0.1-65535.65535> to clear peers with the AS number
in dot format.
Enter the BGP neighbor address in the A.B.C.D format to
clear.
Enter the BGP neighbor address in the X:X:X:X::X format to
clear.
Enter the keyword dampening to clear the flap dampening
information.
Enter the keywords flap-statistics to clear the flap
statistics information.
Enter the ipv4 address family to clear.
Enter the ipv6 address family to clear.
Enter the peer-group to clear all members of the peer-
group.
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Expanded to include the as-number option.
347