Dell S6000 Reference Manual page 114

no
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.2.1.0
Usage Reload the system to reset the command-tree counters.
Information
Example
Dell#show command-tree count
!
Enable privilege mode:
enable command usage:3
exit
show
count option usage: 3
show version command usage:1
!
Global configuration mode:
aaa authentication enable command usage:1
114
Display all of the commands that may be preceded by the
keyword no, which is the keyword used to remove a
command from the running-configuration.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced.
<0-15> option usage: 0
command usage:1
command-tree command usage:9
WORD option usage: 1
default option usage: 0
enable option usage: 0
line option usage: 0
none option usage: 0
radius option usage: 1
tacacs+ option usage: 0
Control and Monitoring