Dell S6000 Reference Manual page 147

terminal
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage The write memory command saves the running-configuration to the file labeled
Information
startup-configuration. When using a LOCAL CONFIG FILE other than the startup-
config not named "startup-configuration" (for example, you used a specific file
during the boot config command), the running-config is not saved to that file;
use the copy command to save any running-configuration changes to that local
file.
Control and Monitoring
Enter the keyword terminal to copy the current running
configuration to the terminal. This command is similar to the
show running-config command.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
147