Dell S6000 Reference Manual page 144

(default is 1), maximum TTL (default is 30), and port number (default is 33434). To
keep the default setting for those parameters, press the ENTER key.
For IPv6, you are prompted for a minimum hop count (default is 1) and a maximum
hop count (default is 64).
Example (IPv4)
Dell#traceroute www.Dell Networking.com
Translating "www.Dell Networking.com"...domain server
(10.11.0.1) [OK]
Type Ctrl-C to abort.
-----------------------------------------------
Tracing the route to www.Dell Networking.com (10.11.84.18),
30 hops max, 40 byte packets
-----------------------------------------------
TTL Hostname
1
2
ms 001.000 ms 001.000 ms
3
000.000 ms 000.000 ms
4
ms 000.000 ms
FTOS#
Example (IPv6)
Dell#traceroute 100::1
Type Ctrl-C to abort.
-----------------------------------------------
Tracing the route to 100::1, 64 hops max, 60 byte packets
-----------------------------------------------
Hops Hostname Probe1
1
FTOS#traceroute 3ffe:501:ffff:100:201:e8ff:fe00:4c8b
Type Ctrl-C to abort.
-----------------------------------------------
Tracing the route to 3ffe:501:ffff:100:201:e8ff:fe00:4c8b,
64 hops max, 60 byte packets
-----------------------------------------------
Hops Hostname
1
Dell#
Related ping
Commands
144
Probe1
10.11.199.190 001.000 ms 001.000 ms 002.000 ms
gwegress-sjc-02.Dell Networking.com (10.11.30.126) 005.000
fw-sjc-01.Dell Networking.com (10.11.127.254) 000.000 ms
www.Dell Networking.com (10.11.84.18) 000.000 ms 000.000
100::1 000.000 ms 000.000 ms 000.000 ms
Probe1
3ffe:501:ffff:100:201:e8ff:fe00:4c8b
000.000 ms 000.000 ms 000.000 ms
— tests the connectivity to a device.
Probe2 Probe3
Probe2 Probe3
Probe2 Probe3
Control and Monitoring