Sharp MX-M905 User Manual page 215

COPIER►BASIC PROCEDURE FOR MAKING COPIES
Stapling each set of sorted copies
The setting procedure in normal mode is explained.
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 2-5)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-29)
Tap the [Output] key.
2
3
Output
Output Tray
Upper Tray
Middle
Tray
Lower Tray Offset
Sort/Group Staple
Off
1 Staple
Trimmer
2 Staples
Setting
Others
• When a finisher (50-sheet stapling) or saddle stitch finisher (50-sheet stapling) is installed, you can select [1 Staple
(Diagonal)] to staple diagonally.
• If you perform 1-staple stapling with a finisher (100-sheet stapling) or saddle stitch finisher (100-sheet stapling)
installed, all staples will be stapled diagonally.
• If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap the [Continue] or
[Cancel] key.
[Continue]:
[Cancel]:
To cancel the staple function:
Tap the [Off] key.
Original
No. of copies
Change Size/Direction.
2-Sided Copy
N-Up
Put Multiple Pages in A Page
Margin Shift
Shift Position to Have Margin
Erase
Separator Page
Erase Shadow Around
Punch Fold
Position
Left Preview
Saddle
Stitch
Top
Proof Copy
Original
Right
3 8½x14
4 11x17 8½x11
Continues sorting without stapling.
Cancels the staple sort setting.
Tap the [Staple] tab, and tap the staple
position key.
Tap the [Original] key to chenge the original settings.
Staple position can be selected from "Position" when
selecting keys other than [Off], [1 Staple (Diagonal)], and
[Saddle Stitch].
CA
After the settings are completed, tap
Start
2-46
.