Copying Sequence - Sharp MX-M905 User Manual

COPIER►BEFORE USING THE MACHINE AS A COPIER

COPYING SEQUENCE

This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy
operation takes place smoothly.
For detailed procedures for selecting the settings, see the explanation of each setting in this chapter.
Switch to copy mode.
1
► SELECTING COPY MODE (page 2-4)
2
Select functions.
3
Specify the original scan size, exposure, resolution, etc.
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-29)
If necessary, you can refer to the following functions for the setting.
In Easy mode
Original
8½x11
Paper
Select
8½x11
Tray 1
CA
Preview
• Paper Select ►page 2-13
• 2-Sided Copy
• Copy Ratio ►page 2-22
• Staple / Punch
• Original ►page 2-29
• Exposure ►page 2-20
• N-Up ►page 2-57
• Card Shot ►page 2-61
2-Sided Copy Copy Ratio Staple / Punch
100%
1 → 1
Copies
►page 2-17
►page 2-44, ►page 2-49
Place the original.
Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-89)
► DOCUMENT GLASS (page 1-91)
In Normal mode
Detail
Original
Auto 8½x11
Paper Select
Auto
2-Sided Copy
1-Sided→1-Sided
Off
Copy Ratio
100%
Exposure
Auto
Output
N-Up
Start
Others
• Original ►page 2-29
• Paper Select
• 2-Sided Copy
• Copy Ratio
• Exposure ►page 2-20
• Output ►page 2-37
• N-Up ►page 2-57
• Others ►page 2-68
2-7
No. of copies Send and Print
No. of copies 1
File
Store Data in Folder
Call Eco Program
Plain 1
8½x11
Proof Copy
Off 1 2
5
8½x11 8½x11
3
8½x14
4 11x17 8½x11
►page 2-13
►page 2-17
►page 2-22
Quick File
Store Data Temporarily
Preview CA
Start