Loading Tab Paper - Sharp MX-M905 User Manual

BEFORE USING THE MACHINE►LOADING PAPER

Loading tab paper

When printing on tab paper, be sure to place the paper with the print side facing up.
For the bypass tray (on the large capacity trays), the dedicated guide must be installed in the bypass tray guides at the
rear end. The dedicated guide is in the upper side of the large capacity trays.
Bypass tray (on the machine)
Left
Place the first sheet of tab paper so that the tab faces
away from you.
Right
Place the first sheet of tab paper so that the tab faces
toward you.
• Use only tab paper that is made of paper. Tab paper made of a material other than paper (film, etc.) cannot be used.
• To copy onto the tabs of tab paper, [Tab Copy] in "Others" is useful.
Inserting transparency film
• Use SHARP-recommended transparency film.
• When loading multiple sheets of transparency film into the bypass tray, fan the sheets several times before loading.
• When printing on transparency film, remove each sheet as it is printed and output from the machine. Allowing sheets to
stack in the output tray may result in curling.
Side 1
Place the first sheet of tab paper so that the tab faces
away from you.
Side 1
Place the first sheet of tab paper so that the tab faces
toward you.
1-84
Bypass tray (on the large capacity trays)
Side 1
Side 1