Punch Settings - Sharp MX-M905 User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

PUNCH SETTINGS

This function punches copies and outputs them to the tray.
Image Orientation
Off
Portrait orientation
Landscape orientation
• To change the default punch settings:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Punch].
• Punch positions are linked to staple positions.
• You can view punch positions on the
• A punch module is required for paper punch.
• You cannot use 12" x 18" (A3W) size paper or special media such as transparency film and tab paper.
• The punch function cannot be used in combination with Saddle Stitch or folding functions. The punch function can be used
in combination with the Z-Fold function when 11"x17", A3, or B4 is used.
Tap the [Staple / Punch] key.
1
► COPY MODE (page 2-3)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-29)
Select punching and set the position.
2
After the settings are completed, tap
Left
Does not punch.
"PREVIEW SCREEN (page
.
Punch Position
Top
1-17)".
2-49
Right