Google Cloud Print - Sharp MX-M905 User Manual

SYSTEM SETTINGS►SYSTEM SETTINGS
Enter a timeout. The default setting is 90 seconds.
Use Banner
Set this option to use the banner. The default setting is "Invalid".
RAW
Raw Print Settings
Raw Print
Set this option to use RAW printing. The default setting is "Valid".
Port Number
Enter a port number. The default setting is port 9100.
Timeout
Enter a timeout. The default setting is 90 seconds.
Use Bidirectional
To use bidirectional communication, set to .
WSD
WSD Settings
WSD Print
Set this option to use WSD printing.
Use Multicast Discovery
Set this option to use multicast discovery.
External Print Services Settings
Google Cloud Print Settings

Google Cloud Print

Status
"Not Set", "Registering", "Registered", or "Offline" will appear. Specify whether or not Google Cloud Print is used.
Always Retain Prints
The retention print function can be enabled in Google Cloud Print.
When this setting is enabled, Google Cloud Print jobs are saved in the "Main Folder" of the document filing function of
the machine.
When this setting is disabled, the machine starts printing immediately after it receives a Google Cloud Print job.
E-mail
This shows the e-mail address of the Google account of the administrator who registered the machine in Google Cloud
Print.
Device Name
Set the device name that appears on the client device.
This setting is the same as the device name on the machine information page of the status.
8-149