COPIER►BASIC PROCEDURE FOR MAKING COPIES
OUTPUT
Configure the output settings for copies using Sort, Group, Offset, Separator Page, Staple, Punch, or Fold. Also specify
the output destination of copies.
You can tap the [Output] key in normal mode to configure settings for all output functions.
Settings for the staple and punch functions can also be configured from simple mode.
No. of copies
Output
Output Tray
Upper Tray
Middle
Tray
Lower Tray
Offset
Sort/Group
Staple
Punch
Auto
Sort
Group
3
8½x14
Others
4
11x17
[Output] screen of normal mode
Output Tray
Specify the destination to output copies.
If a finisher (100-sheet stapling) or saddle stitch finisher (100-sheet stapling) is installed, you can select [Upper Tray],
[Middle Tray], or [Lower Tray].
If a finisher (50-sheet stapling) or saddle stitch finisher (50-sheet stapling) is installed, you can select [Top Tray] or
[Finisher Tray].
CHANGING OUTPUT DESTINATION (page 2-39)
►
Offset
This function outputs copies while shifting them set by set. Setting the checkbox to
setting it to
disables the function.
Offset enabled
This function is available when a finisher or saddle stitch finisher is installed and [Upper Tray], [Lower Tray] or [Finisher Tray]
is selected as the output tray.
Selecting the staple function clears the Offset checkmark automatically.
Original
Change Size/Direction.
2-Sided Copy
N-Up
Put Multiple Pages in A Page
Margin Shift
Shift Position to Have Margin
Erase
Separator Page
Erase Shadow Around
Fold
Preview
CA
Proof Copy
Start
8½x11
Offset disabled
2-37
enables the offset function, and