Table of Contents
Advertisement
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Saddle stitching for sorted copies
This function staples each set of copies at two positions in the center of paper, folds them in half, and outputs them. For
saddle folding, it trims a side drop, offering a good-looking output image.
The setting procedure in normal mode is explained.
• You can view staple positions in
• A saddle stitch finisher is required to use the saddle stitch function.
• The trimmer function is available when a trimmer unit is installed on the machine.
Saddle stitch
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 2-5)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-29)
Tap the [Output] key.
2
3
Output
Output Tray
Upper Tray
Middle
Tray
Lower Tray
Offset
Sort/Group
Staple
Off
1 Staple
Trimmer
2 Staples
Setting
Others
"PREVIEW SCREEN (page
Original
No. of copies
Change Size/Direction.
2-Sided Copy
N-Up
Put Multiple Pages in A Page
Margin Shift
Shift Position to Have Margin
Erase
Separator Page
Erase Shadow Around
Punch
Fold
Preview
Saddle
Stitch
Proof Copy
Original
3
8½x14
4
11x17
8½x11
1-17)".
Tap the [Staple] tab, and tap the
[Saddle Stitch] key.
CA
Start
2-47
Advertisement
Chapters
Table of Contents
