Turning On Upnp In Windows 7 Example - ZyXEL Communications PMG5317-T20A User Manual

See page 111
Use the following screen to configure the UPnP settings on your GPON Device. Click Network
Setting > Home Networking > UPnP to display the screen shown next.
Figure 46 Network Setting > Home Networking > UPnP
The following table describes the labels in this screen.
Table 25 Network Setting > Home Networking > UPnP
LABEL
UPnP
UPnP NAT-T
#
Description
Destination IP
Address
External Port
Internal Port
Protocol
Apply
Cancel

8.4.1 Turning On UPnP in Windows 7 Example

This section shows you how to use the UPnP feature in Windows 7. UPnP server is installed in
Windows 7. Activate UPnP on the GPON Device.
Make sure the computer is connected to a LAN port of the GPON Device. Turn on your computer and
the GPON Device.
Click the start icon, Control Panel and then the Network and Sharing Center.
1
Chapter 8 Home Networking
for more information on UPnP.
DESCRIPTION
Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to open
the web configurator's login screen without entering the GPON Device's IP address
(although you must still enter the password to access the web configurator).
Select Enable to allow UPnP-enabled applications to automatically configure the GPON
Device so that they can communicate through the GPON Device by using NAT traversal.
UPnP applications automatically reserve a NAT forwarding port in order to communicate with
another UPnP enabled device; this eliminates the need to manually configure port
forwarding for the UPnP enabled application.
The table below displays the NAT port forwarding rules added automatically by UPnP NAT-T.
This is the index number of the UPnP NAT-T connection.
This is the description of the UPnP NAT-T connection.
This is the IP address of the other connected UPnP-enabled device.
This is the external port number that identifies the service.
This is the internal port number that identifies the service.
This is the transport layer protocol used for the service.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
PMG5317-T20A User's Guide
118