Table of Contents
Advertisement
Table 26 Network Setting > Home Networking > Additional Subnet (continued)
LABEL
Enable ARP
Proxy
Apply
Cancel
8.6 The TFTP Server Name Screen
Use the TFTP Server Name screen to set the TFTP server address which is passed to the clients
using DHCP option 66. The DHCP clients in the GPON Device local network, such as STB devices
that support the TFTP booting mechanism, can then use the TFTP server address or domain name
for initial system settings download. RFC 2132 defines the option 66 open standard. DHCP option
66 carries the IP address or the domain name of a single TFTP server.
Click Network Setting > Home Networking > TFTP Server Name to open this screen.
Figure 48 Network Setting > Home Networking > TFTP Server Name
The following table describes the labels in this screen.
Table 27 Network Setting > Home Networking > TFTP Server Name
LABEL
TFTP Server
Name
Apply
Cancel
8.7 Technical Reference
This section provides some technical background information about the topics covered in this
chapter.
8.7.1
LANs, WANs and the GPON Device
There are two separate IP networks, one inside the LAN network and the other outside the WAN
network as shown next.
Chapter 8 Home Networking
DESCRIPTION
Select Enable to enable the ARP (Address Resolution Protocol) proxy.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
IP address or the domain name of a single TFTP server.
Enter the
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
PMG5317-T20A User's Guide
121
Advertisement
Table of Contents
