Table of Contents
Advertisement
Table 63 Interface Group Configuration (continued)
LABEL
#
Filter Criteria
WildCard
Support
Modify
OK
Cancel
13.2.2 Interface Grouping Criteria
Click the Add button in the Interface Grouping Configuration screen to open the following
screen.
Figure 89 Interface Grouping Criteria
The following table describes the fields in this screen.
Table 64 Interface Grouping Criteria
LABEL
Source MAC
Address
DHCP Option
60
Enable
wildcard
DHCP Option
61
DHCP Option
125
Enterprise
Number
Chapter 13 Interface Grouping
DESCRIPTION
This shows the index number of the rule.
This shows the filtering criteria. The LAN interface on which the matched traffic is received
will belong to this group automatically.
This shows if wildcard on DHCP option 60 is enabled.
Click the Modify icon to edit this rule from the GPON Device.
Click OK to save your changes back to the GPON Device.
Click Cancel to exit this screen without saving.
DESCRIPTION
Select this option and enter the source MAC address of the packet.
Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic,
such as the type of the hardware or firmware.
Select this option to be able to use wildcards in the Vendor Class Identifier configured for
DHCP option 60.
Select this and enter the device identity of the matched traffic.
Select this and enter vendor specific information of the matched traffic.
Enter the vendor's 32-bit enterprise number registered with the IANA (Internet Assigned
Numbers Authority).
PMG5317-T20A User's Guide
174
Advertisement
Table of Contents
